User Manual of DS-7000HI-S Series Net DVR
Page 99
7.2 Upgrade Mode
1. Use client software to upgrade the firmware file. You do not need to use ftp server
software. Please refer to the client software user manual for detail information.
Enter “Setup” → right click device name→ “remote configuration” → “ Update
Remotely” Press Browse to import the path of firmware “digicap”, click “Upgrade” to
start to upgrade.
2. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need one host PC
to run FTP server software and place firmware file (digicap), and make sure DVR and
PC are in the same sub net.
1. In the “Utilities” Menu select “Upgrade.”
2. Input the FTP server IP address and press [ENTER].
To Next Page
Loading...
Need help?
General