User Manual of DS-7000HI-S Series Net DVR
Page 41
PTZ control: Locally control PTZ;
Record: Manual start/stop recording;
Playback: Local playback and backup the recorded files;
Parameters Setup: Locally setup the DVR parameters;
Log: Locally view the log on DVR;
Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
“Remote Rights”:
PTZ Control: Remote control PTZ;
Record: Remote manual start/stop recording;
Playback: Remote playback, download the recorded files on DVR;
Parameters Setup: Remote setup the DVR parameters;
Log: Remote view the log on DVR;
Utilities: Remote upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
Voice: Client talks with DVR;
Preview: Network live preview;
Alarm: Remote control DVR alarm output;
Local Video Out: Remote control DVR video output;
Com Control: DVR RS-232 transparent channel function.
MAC address
This MAC address is not the address of DVR but the PC that will access DVR. If you setup
this MAC address, only the PC with this MAC address can access this DVR.
At PC end, in DOS prompt, you can use “ipconfig” command to get the PC MAC address (6
bytes).
Locoal Play
Administrator Can seting locoal playback right option for each channel for users.
Remote Play
Administrator Can seting remote playback right option for each channel for users.
Remote Watch
Administrator Can seting remote preview right option for each channel for users.
Delete user
In “User Management” interface, you can use[][]keys to select one user, then use[],
move “Active Frame” to “Del” button, press[ENTER], in the pop-up confirmation dialog, press
“Confirm” button to delete the selected user and return. Press “Cancel” or[ESC]to abort deleting.
To Next Page
Loading...
Need help?
General