User Manual of DS-7000HI-S Series Net DVR
Page 47
Step 3: Press[ENTER]key to exit edit status.
Move “Active Frame” to “Confirm” button, press[ENTER]to save the modification and you
can see the new camera name. Press “Cancel” button or[ESC]key to abort.
Setup Camera Name Position
If you do not want to display camera name, just disable the check box beside camer name
edit box. The disable flag is “×”. If you enable the check box, you can setup the camera name
position. You can copy the position to any other camera. The setup stpes are:
Step 1: Enter “Image Setup” menu.
Step 2: Select one camera.
Step 3: Enable the check box on the right side of camer name, then you move “Active
Frame” to “Position” button, press[ENTER]to enter camera name position setup interface, in that
interface, you can use[][][][]keys to move camera name position. When the position is
fixed, press[ENTER]and return “Image Setup” menu, and press “Confirm” button to save it. In the
“Image Setup” menu, perss “Cancel” button or[ESC]key, you can abort the modification.
To Next Page
Loading...
