User Manual of DS-7000HI-S Series Net DVR
Page 72
*NAS: Network access storage. DVR will regard network HDD as local HDD. If you enable
this function by select “NAS setting”, DVR will send and save the real time image to that network
HDD.
Index IP: The IP of that network storage server.
Directory: The directory name shared by that network storage server.
*HttpPort: The port is for IE browser. The default value is 80. It can be modified.
*PPPoE: DVR supports PPPoE dail-up function.
Example: Use PPPoE function
Step 1: Enter “Network” menu.
Step 2: Select NIC type.
Step 3: Input port number. In the port edit box, use numeric keys to input port number. The
port number must be more than 2000.
Step 4: Input DNS IP. Input one fixed Internet IP address where the IP analyst software
(IPServer) is run.
Step 5: Input PPPoE parameters. Use[ENTER]or[EDIT]key to enable PPPoE function (set
PPPoE flag as “√”). Input PPPoE username, password and verify password that ISP provided.
Step 6: Save parameters. In “Network” menu, press “Confirm” to save parameters. Reboot
DVR to make parameters into effect. In reboot process, DVR will start dialup using PPPoE
function. If DVR dialup Internet successfully, DVR will display the dynamic internet IP address in
“Network” menu.
To Next Page
Loading...
