User Manual of DS-7000HI-S Series Net DVR
Page 82
Step 3: Establish the dialup connection
Select the Modem connected with PC just like the dialup network connection, input the
telephone number connected with DVR’s modem. Input the username, password. They must be
the same as that DVR PPP setup.
Step 4: During the dialup connection, it will give the message of “verification of username
and password”, after successfully verification; the message will be given “on process of register in
PC”. The process is the same as the common dialup connection.
Step 5: After successful dialup, network will designate the “remote IP” address to PC, e.g.
the set 192.1.0.1. User can Ping-link the assigned IP address through Ping command, and can
Ping-link DVR. Please refer to the following picture.
To Next Page
Loading...
