HIKVISION DS-7108HGHI-M1 User Manual

2.
Select Mode as Group.
3.
Select a group number.
4.
Select IP cameras to record on the HDD group.
Figure 6-30 Group
5.
Click Apply.
6.
Restart the video recorder to
acvate the new storage mode sengs.
7.
Aer restart, go to Conguraon → Record → Storage .
8.
Click of desired HDD to set the group.
9.
Select a group number for the current HDD.
10.
Click Apply.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
Note
This funcon is only available for certain models.
1.
Go to Conguraon → Record → Storage Mode .
2.
Set Mode as Quota.
3.
Select a camera to set quota in Camera.
4.
Enter the storage capacity in Record Capacity.
Digital Video Recorder User Manual
76

HIKVISION DS-7108HGHI-M1 Specifications

General

Brand	HIKVISION
Model	DS-7108HGHI-M1
Category	DVR
Language	English