Face Capture
Face capture detects human faces appearing in the scene. Linkage acons can be triggered when a
human face is detected.
Steps
1.
Go to
Conguraon → Event → Face Recognion → Face Capture .
Figure 6-23 Face Capture
2.
Select Camera.
3.
Turn on Enable.
4.
Adjust
Sensivity.
Sensivity
The higher the value is, the more easily the defocus image can trigger the alarm.
5.
Set the arming schedule. Refer to Congure Arming Schedule for details.
6.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
7.
Click Apply.
Face Picture Library Management
Face picture library is mainly used for face picture storage and face picture comparison.
Note
The secon is only available for certain models.
Digital Video Recorder User Manual
64