Need help?Do you have a question about the HIKVISION DS-7116HQHI-F1/N and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| Power consumption (typical) | 20 W |
| Voltage | 12 V |
| Product color | White |
| Rack capacity | 1U |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+ |
| Video input channels | 16 channels |
| USB 2.0 ports quantity | 2 |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 1200 g |
|---|---|
| Dimensions (WxDxH) | 285 x 210 x 45 mm |
Procedure for properly starting up, shutting down, and rebooting the DVR.
Steps for initial device activation, including setting an admin password.
Details on how to use live view functions like single/multi-screen and auto-switch.
Setting recording parameters like resolution, frame rate, and bitrate.
Setting automatic start/stop times for recording and capture based on schedules.
Instructions for playing back recorded files using various search methods.
Configuration of motion detection areas, sensitivity, and response actions.
Configuring basic network parameters like IP address and working mode.
Procedure for initializing new HDDs before they can be used with the DVR.
Common issues and solutions for device operation and connectivity problems.
To Next Page
