Need help?Do you have a question about the HIKVISION DS-7116HGHI-F1 and is the answer not in the manual?
General| Bit rate | 64 Kbit/s |
|---|---|
| Certification | CE |
| Product color | White |
| Channels quantity | 16 channels |
| Maximum frame rate | 30 fps |
| Audio output channels | 2.0 channels |
| Audio formats supported | G.711 μ-law |
| Multi-display supported | Yes |
| Network connection type | RJ-45 |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264, H.264+ |
| Playback resolutions supported | 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Audio input | 1x RCA |
| BNC input ports | 16 |
| USB 2.0 ports quantity | 2 |
| Number of users | 128 user(s) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| DC voltage | 12 V |
| Power supply type | DC |
| Power consumption (typical) | 20 W |
Weight and Dimensions| Depth | 210 mm |
|---|---|
| Width | 285 mm |
| Height | 45 mm |
| Weight | 1200 g |
Provides operational tips to prevent damage and ensure safe use.
Lists general features of the DVR, including camera connectivity and stream support.
Provides instructions for powering the DVR on and off correctly.
Details the process of activating the device by setting an admin password.
Guides through initial device setup using the startup wizard.
Instructions for adding and connecting IP cameras to the DVR.
Details configuring analog and IP signal input types for channels.
Describes various operations available in live view mode.
Details the procedure to set PTZ parameters for camera control.
Instructions for setting and managing PTZ presets, patrols, and patterns.
Details how to configure encoding parameters for recording.
Explains how to set schedules for recording and capture.
Guides on setting motion detection parameters and actions.
Covers configuration of recording and capture triggered by alarms.
Provides methods for playing back recorded video files.
Covers backing up record files to various devices.
Guides on setting motion detection parameters, area, and sensitivity.
Explains how to detect video loss and set alarm response actions.
Covers detecting video tampering and setting alarm responses.
Details configuring actions like full-screen monitoring and email notifications.
Details searching for captured face pictures and related video files.
Covers configuring general network settings like IP, gateway, and DNS.
Details advanced network settings like PPPoE, Cloud P2P, and DDNS.
Covers configuring RAID arrays for data redundancy and performance.
Details the process of rebuilding an array when a disk is degraded or offline.
Provides steps for initializing newly installed hard disk drives.
Provides methods to check the status of installed HDDs.
Explains configuring alarms for HDD errors like Uninitialized or Abnormal status.
Details upgrading the DVR firmware via local backup or FTP server.
Provides detailed technical specifications for various DVR models.
Offers solutions for common issues like no image or no sound.
To Next Page
