Digital Video Recorder Quick Start Guide
8
Set Unlock Pattern
User Login
You have to log in to the device before operating the menu and other functions.
Select User Name.
Enter password for the selected user.
Click OK to log in.
For the admin, if you have entered the wrong password for 7 times, the account will be locked for 60 seconds. For the operator, if
you have entered the wrong password for 5 times, the account will be locked for 60 seconds.
User Logout, Shutdown and Reboot
You can log out of the system, shut down, or reboot the device.
Go to Menu > Shutdown.
Click Logout, Shutdown, or Reboot as your desire.
Configure Signal Input
For certain models, you can configure the analog and IP signal input types and enable 5 MP long distance transmission.
Go to Menu > Camera > Camera > Signal Input Status.
Set the analog signal input channels and types, and the connectable maximum IP camera number. Disabling analog channel(s)
would increase the connectable IP camera number.
Signal Input Status
The interface of different models may vary.
(Optional) You can enable 5 MP Long Distance Transmission for the Turbo HD and AHD signal input.
To Next Page
Loading...
Need help?
General
