Digital Video Recorder Quick Start Guide
9
5 MP Long Distance Transmission Settings
Click Apply to save the settings.
Add IP Camera
Before you can get live video or record the video files, you should add network cameras to the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please refer to the User
Manual for activating the inactive IP camera.
Go to Menu > Camera > Camera > IP Camera.
Click Custom Adding.
Set the IP camera parameters. There are two ways to set IP camera parameters.
− Manually set the IP camera parameters, including IP address, protocol, management port, etc.
− Select the detected IP camera.
(Optional) Click Continue to Add to add other IP cameras.
(Optional) Check Enable H.265 (For Initial Access). If the connected IP camera supports H.265, the IP camera will be encoded
with H.265.
Click Add.
To Next Page
Loading...
