Quick Operation Guide of DS-7200-SH/SV&DS-7300-SH Series DVR
16
Shutting down the device:
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click the Shutdown button to enter the following dialog box:
3. Click the Yes button. The following message box pops up:
4. Turn off the power switch on the rear panel of DVR.
Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts
once the device has loaded.
Operating the Setup Wizard:
1. Select the system resolution from the dropdown menu. The default resolution is 1280×1024/60Hz.
Click Apply to save the resolution settings.
To Next Page
Loading...
