Quick Operation Guide of DS-7200-SH/SV&DS-7300-SH Series DVR
18
5. Click Next button which takes you back to the Network Setup Wizard window.
Set the network parameters, including the NIC type, IPv4 address, IPv4 subnet mask, default gateway, etc.
You can enable the DHCP to automatically obtain an IP address and other network settings from that server.
Note: The DS-7200HWI/HFI/HVI-SH and DS-7200HVI-SV models provide one 100M/100Mbps
self-adaptive network interface, and the DS-7300HWI/HFI-SH models provide one 100M/100M/1000Mbps
self-adaptive network interface.
6. Click Next button to enter the HDD Management window.
To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
To Next Page
Loading...
