DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 127
Figure 161, Set Region Entrance Detection
9. Click Apply to save the settings.
9.5 Region Exiting Detection
The Region Exiting Detection function detects people, vehicles, or other objects that exit from a pre-defined
virtual region. Specific actions can be taken when the alarm is triggered.
See
Chapter 9.5 Region Entrance Detection
to configure region
exiting detection. Up to four rules can be configured.
9.6 Loitering Detection
The Loitering Detection function detects people, vehicles, or other objects that loiter in a pre-defined virtual
region for a pre-defined time. A series of actions can be taken when the alarm is triggered.
Threshold [1s-10s] in Rule Settings defines the time the object
loiters in the region. If you set the value to 5, an alarm is triggered if
the object loiters in the region for 5 seconds. If you set the value to 0,
an alarm is triggered immediately once the object enters the region.
Up to four rules can be configured.
To Next Page
Loading...
