Need help?Do you have a question about the HIKVISION DS-7208HUHI-K2 and is the answer not in the manual?
General| Video input channels | 8 channels |
|---|---|
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Ethernet LAN | Yes |
| Ethernet interface type | Gigabit Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| Power consumption (typical) | 20 W |
| Voltage | 12 V |
| Product color | Black |
| Audio input channels | 4.0 channels |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+, H.265, H.265+ |
| Analog signal format system | NTSC, PAL |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 8000 GB |
| Number of HDDs supported | 2 |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 1780 g |
|---|---|
| Dimensions (WxDxH) | 380 x 320 x 48 mm |
Details the process of setting an admin password and activating the device.
Details the procedure for resetting a forgotten password using a GUID file.
Guides on how to add and connect IP cameras to the DVR.
Details functions in Live View like screen modes, recording, and output.
Covers setting up PTZ parameters like baud rate and protocol.
Guides on configuring presets, patrols, and patterns for PTZ camera movement.
Describes how to access and use the PTZ control panel.
Details settings for video compression, stream type, resolution, and bitrate.
Explains how to set up scheduled recording based on time and event triggers.
Details how to set up motion detection and its recording actions.
Covers configuration for recording triggered by alarm inputs.
Explains how to configure recording for various VCA events.
Covers various methods of playing back recorded footage.
Covers backing up files via normal search, event search, and video clips.
Explains how to configure motion detection parameters and areas.
Details how to configure external sensor alarms.
Describes how to detect and respond to video loss from a channel.
Explains how to detect and respond to video tampering.
Explains how to manage system exceptions like HDD errors and network disconnections.
Details actions taken when an alarm or exception occurs.
Covers setting up alarms based on POS events and their response actions.
Covers configuring face detection rules, sensitivity, and linkage actions.
Details how to configure vehicle detection, including lane settings.
Explains setting up virtual lines for detecting objects crossing paths.
Covers configuring virtual regions for detecting unauthorized entry.
Covers searching for captured face images and related video clips.
Details searching for suspicious behaviors detected by VCA.
Explains how to search for vehicle plate images and related information.
Covers basic network settings like IP address, gateway, and DNS.
Details advanced network configurations like PPPoE and Hik-Connect.
Provides solutions for common issues encountered with the DVR.
To Next Page
