Network Video Recorder User Manual
17
third-party platform can realize functions like live view, playback, two-way audio, PTZ control, etc.
Steps
1. Go to System → Network → Advanced → Platform Access.
Figure 1-15 ISUP Settings
2. Select Access Type as ISUP.
3. Check Enable.
Note
Enabling ISUP will disable other platform access.
4. Set the related parameters.
Server Address
The platform server IP address.
Server Port
The platform server port, ranges from 1024 to 65535. The actual port shall be provided by the
platform.
Device ID
Device ID shall be provided by the platform.
Version
ISUP protocol version, only V5.0 is available.
Encryption Password
Encryption password is required when using ISUP V5.0 version, it provides more secure
communication between the device and platform. Enter it for verification after the device is
To Next Page
Loading...
Need help?
General
