HIKVISION DS-7600NXI-K1/P Series - Chapter 1 Startup; 1.1 Activate Your Device

Chapter 1 Startup
1.1 Acvate Your Device
For the rst-me access, you need to acvate the video recorder by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the video recorder via web browser,
SADP or client soware.
Before You Start
Power on your device.
Steps
1.
Select a language.
2.
Click Apply.
3.
Set the
resoluon as 1920*1080/60Hz (1080P) as needed.
Note
●
The resoluon is 1280*720/60Hz (720P) by default. If you check Do not show this prompt
again., the prompt will not appear again aer reboong.
●
Aer the device is connected to the monitor with HDMI cable, the resoluon will be
automacally adjusted to 1920*1080/60Hz (1080P). Some monitor models do not support
resoluon adaptaon.
4.
Input the same password in Password and Conrm Password.
Figure 1-1 Acvaon
Network Video Recorder User Manual
1