EasyManuals Logo

HIKVISION DS-7604NI-Q1 User Manual

HIKVISION DS-7604NI-Q1
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Network Video Recorder Quick Start Guide
18
Figure 3-3 Set Admin Password
STRONG PASSWORD RECOMMENDEDWe highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Step 2 In the IP Camera Activation text field, enter the password to activate the IP camera (s)
connected to the device.
Step 3 Click OK to save the password and activate the device.
For the old version device, if you upgrade it to the new version, the following dialog box will pop
up once the device starts up. You can click YES and follow the wizard to set a strong password.
Figure 3-4 Warning of Weak Password

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7604NI-Q1 and is the answer not in the manual?

HIKVISION DS-7604NI-Q1 Specifications

General IconGeneral
Audio system2-way
Input bandwidth40 Mbit/s
Number of users16 user(s)
Output bandwidth80 Mbit/s
Maximum resolution3840 x 2160 pixels
Video input channels4 channels
Supported resolutions3840 x 2160, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768
Audio formats supportedG.711 A-law, G.711 μ-law, G.726
Video formats supportedH.264, H.264+, H.265, H.265+
Wi-FiNo
HDD capacity- GB
HDD interfaceSATA
Maximum storage capacity8 TB
Number of HDDs installed0
Number of HDDs supported1
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
Power over Ethernet (PoE)Yes
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity4
Power consumption (typical)10 W
Total Power over Ethernet (PoE) budget50 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
CertificationPart 15 Subpart B, ANSI C63.4-2014
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width320 mm
Height48 mm
Weight1000 g

Related product manuals