Network Video Recorder User Manual
211
15.5 Managing User Accounts
Purpose:
There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is
set when you start the device for the first time. The Administrator has the permission to add and delete user and
configure user parameters.
15.5.1 Adding a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
Figure 15. 6 User Management Interface
2. Click the Add button to enter the Add User interface.
Figure 15. 7 Add User Menu
3. Enter the information for new user, including User Name, Password, Confirm, Level and User’s MAC
To Next Page
Loading...
