HIKVISION DS-8116HQHI-F8/N User Manual

Digital Video Recorder User Manual
251
Figure 16-8 FTP Upgrade Interface
Step 3 Enter the FTP Server Address in the text field.
Step 4 Click the Upgrade button to start upgrading.
Step 5 After the upgrading is completed, reboot the DVR to activate the new firmware.
16.6 Upgrading Camera
Purpose
You can upgrade multiple connected analog cameras supporting Turbo HD or AHD signal
simultaneously with DVR.
This chapter is applicable to the DS-7200HUHI-F/S series DVR.
Step 1 Enter the Camera Upgrade interface.
Figure 16-9 Camera Upgrade
Step 2 Check the checkbox(es) of the analog camera(s) for upgrading.
The analog camera must support Turbo HD or AHD signal.
Step 3 Select the update file from the backup device.
Step 4 Click the Upgrade button to start upgrading.
16.7 Restoring Default Settings
Step 1 Enter the Default interface.
Menu > Maintenance > Default

HIKVISION DS-8116HQHI-F8/N Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Two-Way Audio	Yes
Video Bitrate	32Kbps to 10Mbps
Audio Bitrate	64Kbps
Dual Stream	Yes
Synchronous Playback	16-ch
Remote Connections	128
USB Interface	2 USB 2.0
Alarm In/Out	16/4
Working Humidity	10% to 90%
Dimensions	445 mm × 400 mm × 71 mm (17.5 inch × 15.7 inch × 2.8 inch)
Weight	≤6.5kg (14.33lb)
Video Input	16 channels
AHD Input	16 channels
HDCVI Input	16 channels
CVBS Input	16 channels
IP Video Input	16 channels
Audio Compression	G.711u
Audio Input	16 channels
Video Output	HDMI, VGA, CVBS
HDMI Output	1
VGA Output	1
CVBS Output	1
Recording Resolution	1080p/720p/WD1/4CIF/VGA/CIF
Audio Output	1
Stream Type	Video, Video & Audio
Network Protocols	TCP/IP, DHCP, DNS, DDNS, HTTP, P2P
SATA	8
Capacity	Up to 10TB per HDD
Network Interface	1 RJ45 10M/100M/1000Mbps
Serial Interface	1 RS-485
Power Supply	100-240V AC, 50/60Hz
Consumption	≤40W (without HDD)
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
HDD Capacity	Up to 10 TB capacity for each HDD
Playback Resolution	1080p/720p/WD1/4CIF/VGA/CIF
Power Consumption	≤40W (without HDD)