Network Video Recorder User Manual
149
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Click Apply.
For iDS-7200HQHI-K/S and iDS-7200HUHI-K/S series, you can check to enable human body and
vehicle detection.
Intrusion Detection
Purpose:
Intrusion detection function detects people, vehicle or other objects which enter and loiter in a
pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
Go to System > Event > Smart Event.
Click Intrusion.
Intrusion Detection
Select a camera to configure.
Check Enable Intrusion Detection.
Optionally, check Save VCA Picture to save the captured pictures of intrusion
detection.
Follow the steps to set the detection rules and detection areas.
To Next Page
Loading...
Need help?
General