Network Video Recorder User Manual
146
Face Detection
Select a camera to configure.
Check Enable Face Detection.
Optionally, check Save VCA Picture to save the captured pictures of face detection.
Drag the Sensitivity slider to set the detection sensitivity. Sensitivity range: [1-5]. The
higher the value is, the more easily the face can be detected.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Click Apply.
Vehicle Detection
Purpose:
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Go to System > Event > Smart Event.
Click Vehicle.
To Next Page
Loading...
Need help?
General