HIKVISION DS-8600 Quick Operation Guide

Quick Operation Guide of Network Video Recorder
5
4. Connect the power cable to the HDD.
5. Re-install the cover of the NVR and fasten screws.
Steps (for DS-7600NI-ST/SP and DS-7700NI-ST/SP):
1. Remove the cover from the NVR by unfastening the screws on the rear and side panel.
2. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.
3. Connect the power cable to the HDD.

HIKVISION DS-8600 Specifications

General

Brand	HIKVISION
Model	DS-8600
Category	Network Hardware
Language	English