Network Video Recorder User Manual
126
Figure 7-9 Search Result (Access Control)
Figure 7-10 Search Result (Alarm Device)
7.6 IoT Video/Picture
Configure the event recording or capturing schedule for the selected trigger channel, the channel
will automatically record videos or capture pictures when IoT alarm occurs.
7.6.1 Configure the Event Recording/Capturing
The video recorder can record videos or capture pictures when an IoT alarm occurs.
Steps
1. Click of an added IoT device.
2. Select desired Event Type.
3. Check Enable.
4. Check Trigger Channel you want to record event videos or capture pictures when an alarm
occurs.
To Next Page
Loading...
Need help?
General
