Network Video Recorder Quick Start Guide
14
Pull out Slot
Fix the hard disk in the hard disk box.
1) Place a hard disk in the hard disk box. The SATA interface must face the hard disk box
bottom.
2) Adjust the hard disk position. Ensure the hard disk rear aligns with hard disk bottom.
3) Use a screwdriver to fasten the four screws into the screw holes in both sides.
Fix the Hard Disk
Push the hard disk box back into the slot.
Push the Hard Disk Box into the Slot
Press the handle until you hear a click. Thus to fix the hard disk box. Repeat above steps to
install the rest hard disk boxes.
To Next Page
Loading...
