Network Video Recorder Quick Start Guide
23
Network Settings
Purpose:
Network settings must be properly configured before you operate device over network.
Go to System > Network > TCP/IP.
Network Settings
Configure the parameters of NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can check DHCP to automatically obtain an IP address
and other network settings from that server.
After having configured the general settings, click Apply to save the settings.
Add IP Cameras
Purpose:
Before you can get live video or record the video files, you should add the network cameras to the
connection list of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated.
Click on the main menu bar to enter the Camera Management.
To Next Page
Loading...
