Network Video Recorder Quick Start Guide
21
Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when
the pattern is done.
Draw the Pattern
Connect at least 4 dots to draw the pattern.
Each dot can be connected for once only.
Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
Log in to the System
Purpose:
If the device has logged out, you must log in to the device before operating the menu and other
functions. You can select to log in by unlock pattern or passwrod.
Right click the mouse on the screen and select the menu to enter the interface.
Enter User Name.
To Next Page
Loading...
