Quick Start Guide of Network Video Recorder
6
disks can be installed; for DS-9600NI-XT, up to 16 SATA hard disks can be installed, and up to 8 SATA hard
disks can be installed for other models.
Tools Required: Screwdriver.
Steps (for DS-9600NI-ST/RT/XT):
1. Fasten the hard disk mounting handle to the hard disk with screws.
2. Insert the key and turn in clockwise direction to open the panel lock.
3. Press the buttons on the panel of two sides and open the front panel.
4. Insert the hard disk along the slot until it is placed into position.
To Next Page
Loading...
Need help?
General
