HIKVISION DS-9608NI-ST Quick Start Guide

Quick Start Guide of Network Video Recorder
7
5. Repeat the above steps to install other hard disks onto the NVR. After having finished the installation of all
hard disks, close the front panel and lock it with the key again.
Steps (for DS-8600NI-ST):
1. Remove the cover from the NVR by unfastening the screws on the back and side.
2. Install the HDD in the HDD rack using the provided screws. Fasten the screws on the
button to fix the HDD.
3. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.

HIKVISION DS-9608NI-ST Specifications

General

Brand	HIKVISION
Model	DS-9608NI-ST
Category	Network Hardware
Language	English