Need help?Do you have a question about the HIKVISION DS-C30S-S11 and is the answer not in the manual?
General| Model | DS-C30S-S11 |
|---|---|
| Category | Controller |
| Port Rate | 12Gb/s |
| RAID Level | RAID 0, 1, 5, 6, 10, 50, 60 |
| Operating Temperature | 0°C to 40°C |
Lists the compatible video wall controller models.
Shows default device login credentials and IP address.
Details compliance with electrical safety regulations and surge protection.
Introduces the FPGA-based hardware image processing device and its architecture.
Outlines the sequence of steps for initial device setup.
Guides on activating the device using Hikvision's SADP tool.
Provides steps for activating the device through a web interface.
Instructions for accessing the device's web interface for configuration.
Steps to set the IP address, subnet mask, and gateway.
Detailed steps for setting up the video wall scale and output ports.
Functions for managing signal source windows on the video wall.
Adjusting image parameters, tuning, clipping, and OSD for screens.
General device settings including system parameters and basic info.
Performing system maintenance like restart and firmware upgrade.
Managing IP address filters, SADP, and Syslog for security.
To Next Page
