HIKVISION DS-K1100 Series

Title:
DS-K1100 Series Card Readers Connect
to DS-K2600 Series Access Controllers
by Wiegand
Version:
v1.0
Date:
6/21/2017
Product:
Access Control Device
Page:
1 of 5
DS-K1100 Series Card Readers Connect to DS-K2600
Series Access Controllers by Wiegand
Preparation
Connecting card reader to access controller is mainly applied to swiping card to open the door for entrring
or exiting. For card reader and access controller in this documents, please check the table below:
Card Reader
Access Controller
DS-K1101M/MK, DS-K1102M/MK,
DS-K1103M/MK, DS-K1104M/MK,
DS-K1107M/MK, DS-K1108M/MK
DS-K2601,
DS-K2602,
DS-K2604
DS-K1102E/EK, DS-K1107E/EK,
DS-K1108E/EK
Notice
1. Please cut off power supply before wiring;
2. DS-K1100 Series Card Readers support standard Wiegand 26/34 protocol; about Wiegand cable of
card reader, please check the table below:
Color
Description
Red
Power (DC +12V)
Black
GND
Green
W0 (available for Wiegand Protocol)
White
W1 (available for Wiegand Protocol)
Purple
Beep Control (available for Wiegand Protocol)
Brown
Blue/Green LED Control (available for Wiegand Protocol)
Orange
Red LED Control (available for Wiegand Protocol)
Gray
Tamper (available for Wiegand Protocol)
Yellow
RS-485+
Blue
RS-485-
3. Correspondingly, there are wiegand interfaces in DS-K2600 series access controllers;
DS-K2601
DS-K2602
DS-K2604