Need help?Do you have a question about the HIKVISION DS-K1102AE and is the answer not in the manual?
General| Model | DS-K1102AE |
|---|---|
| Category | Card Reader |
| Card Reading Frequency | 13.56 MHz |
| Communication Interface | RS-485, Wiegand |
| Wiegand Interface | Wiegand 26/34 |
| Tamper-proof | Yes |
| Operating Voltage | 12 V DC |
| Operating Temperature | -20° C to +65° C (-4° F to +149° F) |
| Operating Humidity | 10% to 90% (Non-condensing) |
| Working Humidity | 10% to 90% (Non-condensing) |
| Ingress Protection | IP65 |
| Dimensions | 124 mm × 88 mm × 21.5 mm (4.88" × 3.46" × 0.85") |
| Supported Card Types | Mifare |
Instructions for using and managing the product, subject to change without notice.
Lists Hikvision and other trademarks and their respective owners.
Legal disclaimer regarding product use, liability, warranties, and risks.
Statement on FCC rules, device testing, and potential radio frequency interference.
Compliance with European standards (EMC, RoHS) and directives (WEEE, battery).
Statement on compliance with Industry Canada standards for digital devices.
Important safety guidelines covering potential dangers and cautions for users.
Lists available card reader models and recommended power supplies.
Overview of the card reader's features, processor, communication protocols, and material.
Illustrates and describes the front panel, including the keypad.
Shows the side profile of the card reader.
Details the rear view, including labeled components and interfaces.
Explains the function and configuration of the DIP switch for various settings.
Details cable descriptions and connection methods for communication.
Steps to configure the card reader for RS-485 communication.
Steps to configure the card reader for Wiegand communication.
Step-by-step guide for physically mounting the card reader.
Explains the meaning of different sound prompts and LED indicator statuses during operation.
Provides tips for proper installation, power, cabling, and usage to ensure optimal performance.
QR code to access the device communication port matrix for Hikvision devices.
QR code to access common serial port commands for Hikvision devices.
To Next Page