Need help?Do you have a question about the HIKVISION DS-K1100 Series and is the answer not in the manual?
General| Model | DS-K1100 Series |
|---|---|
| Category | Card Reader |
| Card Reading Frequency | 13.56 MHz |
| Power Consumption | ≤ 3W |
| Audio | Buzzer |
| Operating Humidity | 10% to 90% (Non-condensing) |
| Supported Card Types | MIFARE |
| Communication Interface | RS-485, Wiegand |
| Reading Range | Up to 50 mm |
| Operating Voltage | 12 VDC |
| Power Supply | 12 VDC ± 10% |
| Installation | Wall-mounted |
Information on Hikvision's trademarks and other companies' properties.
Explains product warranty, liability, and usage terms.
Details on FCC rules compliance for Class A digital devices.
Specifies the two conditions for FCC compliance.
Information about CE marking and compliance with EU directives.
Compliance statement for Industry Canada ICES-003 standards.
General guidance to ensure correct product usage and avoid danger.
Illustrates the front view of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Displays the rear view of various DS-K1100 series card readers.
Shows the side views of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Instructions for inserting a PSAM card into the CPU card reader.
Explains the DIP switch module and its binary representation.
Lists the cable colors and their corresponding descriptions.
Details on connecting the card reader to the controller via RS-485 or Wiegand.
Step-by-step guide for physically installing the card reader.
To Next Page
