Need help?Do you have a question about the HIKVISION DS-K1102AM and is the answer not in the manual?
General| Model | DS-K1102AM |
|---|---|
| Category | Card Reader |
| Communication Interface | Wiegand, RS-485 |
| Card Reading Frequency | 13.56 MHz |
| Audio | Buzzer |
| Operating Voltage | 12 VDC |
| Operating Current | ≤ 100 mA |
| Operating Humidity | 10% to 90% (non-condensing) |
| Working Humidity | 10% to 90% (non-condensing) |
| Dimensions | 122 mm × 78 mm × 25 mm |
| Supported Card Types | Mifare |
| Wiegand Interface | Wiegand 26/34 |
| Operating Temperature | -20 °C to +60 °C |
| Working Temperature | -20 °C to +60 °C |
Legal disclaimer regarding product use, liability, and third-party rights.
Explains data collection, storage, processing, and privacy by design principles.
Details FCC compliance, including device testing and conditions for operation.
Covers CE marking, WEEE, and battery directive compliance for European standards.
Shows the front layout of the card reader, including the keypad and display area.
Illustrates the side profile of the card reader, showing its dimensions and mounting features.
Details the rear of the card reader, identifying connection ports and internal modules.
Explains DIP switch functions for address, security, and communication mode configuration.
Provides cable descriptions and wiring diagrams for RS-485 and Wiegand communication.
Guides users through physical installation, including fixing plates and connecting the device.
To Next Page