Need help?Do you have a question about the HIKVISION DS-K1103MK and is the answer not in the manual?
General| UN number | - |
|---|---|
| Front camera | No |
| RS-485 ports | 1 |
| Type | Basic access control reader |
| Certification | FCC, CE |
| Product color | Black, Grey |
| LED indicators | Status |
| RFID frequency | 13.56 MHz |
| Housing material | Acrylonitrile butadiene styrene (ABS), Polycarbonate (PC) |
| Access code reader | Yes |
| Authentication type | Access chip/card |
| Keypad number of keys | 12 |
| Access chip/card reader type | Contactless |
| Contactless working distance | 50 mm |
| International Protection (IP) code | IP64 |
| Operating temperature (T-T) | -20 - 65 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Input voltage | 12 V |
| Power consumption | 500 mA |
| Power consumption (typical) | 2 W |
Weight and Dimensions| Depth | 14.7 mm |
|---|---|
| Width | 76 mm |
| Height | 129 mm |
| Weight | 150 g |
Details FCC compliance for Class A digital devices and operating conditions.
Confirms product compliance with CE marking and relevant EU directives.
Provides essential warnings and cautions for safe operation and to prevent damage.
Illustrates the front view of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Details the rear view of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Presents the side view of various DS-K1100 series card readers.
Instructions for inserting a PSAM card into the slot, available for CPU card readers.
Explains the DIP switch module and its binary mode representation for configuration.
Describes the color coding and function of various cables used for connection.
Provides steps and diagrams for RS-485 and Wiegand communication mode wiring.
Outlines the steps for physically installing the card reader, including fixing it to a gang box.
To Next Page
