Do you have a question about the HIKVISION DS-K1102E and is the answer not in the manual?
Model | DS-K1102E |
---|---|
Category | Card Reader |
Card Reading Frequency | 13.56 MHz |
Wiegand Interface | Wiegand 26/34 |
RS-485 Interface | Yes |
Operating Voltage | 12 VDC |
Power Supply | 12 VDC |
Working Humidity | 10% to 90% (non-condensing) |
Protection Level | IP65 |
Installation | Wall Mounting |
Communication Interface | RS-485, Wiegand |
Supported Card Types | MIFARE, ISO14443 Type A/B |
Tamper-Proof | Support |
Operating Current | 100 mA |
Working Temperature | -20°C to 60°C |
Details FCC rules for Class A digital devices and interference protection.
Confirms compliance with EU directives like RE, EMC, LVD, and RoHS.
General guidelines for correct product usage and avoiding hazards.
Compliance statement for Industry Canada ICES-003 standards.
Safeguards to prevent serious injury or death during operation.
Precautions to prevent potential injury or material damage.
Illustrates the front appearance of DS-K1101 series card readers.
Shows rear components and their descriptions for DS-K1101 series.
Displays the side profile of DS-K1101 series card readers.
Guide for inserting PSAM cards into CPU card readers.
Explains the DIP switch module and its binary representation.
Details the color coding and function of various cables for connectivity.
Instructions for connecting controller and card reader via RS-485 and Wiegand.
Steps for physically mounting the card reader to a wall or surface.
Explains various sound prompts and their meanings during operation.
Details LED statuses and their corresponding operational meanings.