Need help?Do you have a question about the HIKVISION DS-K1104MK and is the answer not in the manual?
General| Quantity per pack | 1 pc(s) |
|---|---|
| Internal | No |
| Product color | Black, Silver |
| Built-in processor | Yes |
| Compatible memory cards | - |
| RS-485 ports | 1 |
| Type | Basic access control reader |
| Certification | FCC, CE |
| LED indicators | Status |
| RFID frequency | 13.56 MHz |
| Authentication type | Access chip/card, Password |
| Supported protocols | Mifare |
| Keypad number of keys | 12 |
| RFID reading distance | 50 mm |
| International Protection (IP) code | IP65 |
| Operating temperature (T-T) | -20 - 65 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power consumption | 0.5 mA |
Weight and Dimensions| Depth | 23 mm |
|---|---|
| Width | 76 mm |
| Height | 118 mm |
| Weight | 520 g |
Details FCC compliance for Class A digital device, ensuring protection against harmful interference in commercial environments.
Specifies the two conditions under which the device complies with FCC Part 15 rules for operation.
States product compliance with EU directives (RE, EMC, LVD, RoHS) marked with 'CE'.
Safeguards to prevent serious injury or death. Focuses on electrical safety, proper handling, and device integrity.
Precautions to prevent potential injury or material damage, covering environmental conditions and physical handling.
Tips for ensuring proper card reader operation, including power supply distance and communication cable requirements.
Illustrates and describes the front appearance of DS-K1101 series card readers with keypads and card slots.
Shows and labels the rear components of DS-K1101, DS-K1102, and DS-K1103 series card readers.
Presents side profile views of various DS-K1100 series card reader models for dimensional reference.
Guide for inserting a PSAM card into the CPU card reader slot, noting its availability for specific models.
Explains the DIP switch module with its numbered switches and their binary representation for configuration.
Details the color coding and function of various cables used for connecting the card reader to the controller.
Provides steps for connecting the card reader to a controller via RS-485 or Wiegand protocols, including diagrams.
Step-by-step instructions for physically mounting the card reader onto a wall or surface using a gang box.
Details the meaning of different sounds produced by the card reader, such as single beeps or rapid beeps.
Explains the various states of the LED indicator (color and blinking) and their corresponding operational meanings.
To Next Page
