Need help?Do you have a question about the HIKVISION DS-K1102M and is the answer not in the manual?
General| Internal | No |
|---|---|
| Certification | IP64 CE, FCC |
| Product color | Black |
| LED indicators | Power, Status |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Compatible memory cards | - |
| Input voltage | 12 V |
| Output current | 500 mA |
| Power source type | DC |
| Power consumption (max) | 2 W |
| Operating temperature (T-T) | -20 - 65 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Interface | RS485 / Wiegand |
| Supported protocols | Mifare |
| USB 3.2 Gen 1 (3.1 Gen 1) ports quantity | 0 |
| Built-in processor | Yes |
| International Protection (IP) code | IP64 |
| Frequency | 13.56 MHz |
| Maximum read range | 50 mm |
Weight and Dimensions| Depth | 121 mm |
|---|---|
| Width | 86.5 mm |
| Height | 14 mm |
| Weight | 140 g |
Illustrates the front appearance of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Details the rear view and component descriptions for DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Displays the side profile of DS-K1101, DS-K1102, DS-K1103, and DS-K1104 series card readers.
Instructions for inserting a PSAM card into the slot for CPU card readers.
Explains the DIP switch module and its binary mode representation for device configuration.
Lists and describes the function of various colored cables used for connecting the card reader.
Provides detailed wiring instructions for RS-485 and Wiegand communication modes.
Step-by-step guide on how to physically mount and install the card reader.
To Next Page
