Need help?Do you have a question about the HIKVISION DS-K1103M and is the answer not in the manual?
General| Device Type | Card Reader |
|---|---|
| Model | DS-K1103M |
| Brand | HIKVISION |
| Communication Interface | RS-485 |
| Operating Voltage | 12 VDC |
| Operating Current | ≤ 100 mA |
| Operating Humidity | 10% to 90% (non-condensing) |
| Ingress Protection Rating | IP65 |
| Certifications | CE, FCC |
| Card Reading Frequency | 13.56 MHz |
| Supported Card Types | Mifare |
| Processor | 32-bit |
| Working Temperature | -20°C to 60°C |
Illustrates the physical appearance of the front panel for various DS-K1101 series card readers.
Details the physical layout and components visible on the rear side of the card reader models.
Presents the side profiles of different DS-K1100 series card reader models.
Instructions on how to correctly insert a PSAM card into the designated slot for CPU card readers.
Explains the function and configuration of the DIP switch module for device settings.
Provides a detailed mapping of cable colors to their specific functions and connections.
Guides on connecting the card reader to the controller using appropriate wiring methods for RS-485 and Wiegand.
Step-by-step instructions for physically mounting and securing the card reader device.
Details the different sound alerts the card reader generates for various operations and events.
Explains the meaning of different LED colors and blinking patterns for device status indication.
To Next Page
