HIKVISION DS-K1103MK User Manual

DS-K1100 Series Card Reader
v
Warnings: Neglecting any of the warnings may cause serious injury or
death.
Cautions: Neglecting any of the cautions may cause injury or equipment
damage.
Warnings
 All the electronic operation should be strictly compliance with the
electrical safety regulations, fire prevention regulations and other related
regulations in your local region.
 Please use the power adapter, which is provided by normal company. The
power consumption cannot be less than the required value.
 Do not connect several devices to one power adapter as adapter overload
may cause over-heat or fire hazard.
 Please make sure that the power has been disconnected before you wire,
install or dismantle the device.
 When the product is installed on wall or ceiling, the device shall be firmly
fixed.
 If smoke, odors or noise rise from the device, turn off the power at once
and unplug the power cable, and then please contact the service center.
 If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the device yourself.
(We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)
Cautions
 Do not drop the device or subject it to physical shock, and do not expose
it to high electromagnetism radiation. Avoid the equipment installation on
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.

HIKVISION DS-K1103MK Specifications

General

UN number	-
Front camera	No
RS-485 ports	1
Type	Basic access control reader
Certification	FCC, CE
Product color	Black, Grey
LED indicators	Status
RFID frequency	13.56 MHz
Housing material	Acrylonitrile butadiene styrene (ABS), Polycarbonate (PC)
Access code reader	Yes
Authentication type	Access chip/card
Keypad number of keys	12
Access chip/card reader type	Contactless
Contactless working distance	50 mm
International Protection (IP) code	IP64
Operating temperature (T-T)	-20 - 65 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	12 V
Power consumption	500 mA
Power consumption (typical)	2 W

Weight and Dimensions

Depth	14.7 mm
Width	76 mm
Height	129 mm
Weight	150 g