HIKVISION DS-K1T343 Series - Set Image Parameters

Note
If authencaon is failed in the congured me duraon, the device will broadcast the
congured content.
3) Enter the audio content.
4)
Oponal: Repeat substep 1 to 3.
5) Oponal: Click to delete the congured me duraon.
8.
Oponal: Add holiday schedule.
1) Click Add to add holiday schedule.
2) Repeat step 3 to 6.
9.
Click Save to save the
sengs.
9.5.15 Set Image Parameters
Set the video standard, WDR, brightness, contrast, saturaon, and sharpness.
Steps
1.
Click Conguraon → Image Adjustment .
Figure 9-9 Image Sengs Page
2.
Congure the parameters to adjust the image.
Video Standard
Set the video frame rate when performing live view remotely.
Aer changing the standard,
you should reboot the device to take eect.
PAL
DS-K1T343 Series Face Recognion Terminal User Manual
102