HIKVISION DS-K1T343 Series - Chapter 6 Quick Operation; 6.1 Select Language; 6.2 Set Application Mode

Chapter 6 Quick Operaon
6.1 Select Language
You can select a language for the device system.
Aer the device acvaon, you can select a language for the device system.
Figure 6-1 Select System Language
By default, the system language is English.
Note
Aer you change the system language, the device will reboot automacally.
6.2 Set Applicaon Mode
Aer acvang the device, you should select an applicaon mode for beer device applicaon.
Steps
1.
On the Welcome page, select Indoor or Others from the drop-down list.
DS-K1T343 Series Face Recognion Terminal User Manual
20