EasyManua.ls Logo

HIKVISION DS-K1T343 Series - Access Control Settings

HIKVISION DS-K1T343 Series
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
main staon, plaorm) are in the same IP segment, the two-way audio can be performed.
Tap Conguraon → Intercom → Linked Network Sengs .
Figure 8-12 Linked Network Sengs
Set the video intercom server IP and main staon's IP.
Tap Save.
Press
Buon to Call
Steps
1.
Tap
Conguraon → Intercom → Press Buon to Call to enter the sengs page.
2.
Set the buon to call.
-
Check Call Indoor Staon and set the indoor staon No to set the buon to call indoor
staon.
-
Check Call Management Center to set the buon to call management center.
8.4.8 Access Control
Sengs
Set Door Parameters
Tap Conguraon → Access Control → Door Parameters .
DS-K1T343 Series Face Recognion Terminal User Manual
80

Table of Contents

Related product manuals