HIKVISION DS-K1T343 Series User Manual

Figure 3-2 Install Mounng Plate
3.
Route the cables through the cable hole of the mounng plate, and connect to the
corresponding peripherals cables.
4.
Buckle into the
mounng plate aer aligning the device with the mounng plate. Use 1 supplied
screw (M3) to secure the device on the
mounng plate.
DS-K1T343 Series Face Recognion Terminal User Manual
5

HIKVISION DS-K1T343 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T343 Series
Category	Touch terminals
Language	English