HIKVISION DS-K1T642M - 7.7 Set Biometric Parameters; 8.3 Person Management

You should set a room No. When you tap the call buon on the authencaon page, you can
call the congured room directly without dialing.
Voice Sengs
You can enable/disable the voice prompt funcon and adjust the voice volume.
Note
You can set the voice volume between 0 and 10.
Time Sengs
Set the me zone, the device me and the DST.
Language
Select the language according to actual needs.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Beauty
You can enable the beauty
funcon and set the smooth and the whiten parameter. Tap + or - to
control the eect strength.
Note
By default, the funcon is disabled.
7.7 Set Biometric Parameters
You can customize the face parameters to improve the face recognion performance. The
congurable parameters includes applicaon mode, face liveness level, face recognion distance,
face
recognion interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO
sengs, hard hat detecon level, and face with mask detecon.
Long tap on the inial page for 3 s and login the home page. Tap Biometric.
Face Recognion Terminal User Manual
49