Distributed Elevator Controller User Manual
1
Overview Chapter 1
1.1Introduction
The elevator controller contains master elevator controller and distributed elevator controller. It can be applied
to buildings, public areas and so on. The distributed elevator controller can communicate with the master
elevator controller and the relay via RS-485. You can also control the distributed elevator controller by the web
client, iVMS-4200 client software and other systems through the master elevator controller.
1.2Main Features
RS-485 communication with the master elevator controller.
DIP switch settings for device address.
Connectable with up to 16 relays to control the floor buttons in the elevator. Three types of relays are
supported: Button Relay, Call Elevator Relay and Auto Button Relay.
Remote control of the distributed elevator controlling via the web client, the iVMS-4200 client software, or
other systems through the master elevator controller.
Linkage of the master elevator controller to report the event to the system.