Distributed Elevator Controller User Manual
3
2.2Indicator Introduction
The indicator information is as follows:
Table 2. 2 Indicator Description
Serial Port Not Communicating
Serial Port Communicating
2.3DIP Switch Introduction
The DIP switch module is shown below. The No. of DIP switch from left to right is 1 to 8.
Table 2. 3 Description of DIP Switch
Represent 1 in binary mode
Represent 0 in binary mode
For example, binary value of the following status is: 0011 0000.
DIP Switch Module
Table 2. 4 Description of DIP Switch Address
Address of Distributed Elevator Controller
To Next Page
Loading...
Need help?
General
