© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: support@hikvision.com • www.hikvision.com
Preparation
1. Access Controller 2600 series
2. Access Control Terminal
3. Lock DS-K4E100
DS-K4E100 Connect to Access Controller or Access Control Terminal
This document is simply used to guide users how to wire correctly and ensure access
control terminal or K2600 controller can control lock K4E100.
K4E100 Working Principle:
The lock tongue will be extended and locked when the V+ (12V) & GND power up. And
when the L + and L- terminals are powered immediately (＞5V), the lock tongue will retracted
to unlock.
To Next Page
Need help?
General
