HIKVISION DS-KB8112-IM - 4.1.2 Wall Mounting

Video Intercom Vandal-Resistant Door Station·Quick Start Guide
9
4.1.2 Wall Mounting
Steps:
1. Fix the wall mounting plate to the wall with 4 expansion screws.
Expansion Screws
Wall Mounting Plate
Figure 4-2 Install the Plate
2. Insert terminal blocks into the interfaces of the door station body,
and connect the network cable.
Interfaces
(Power, Alarm
In, Alarm Out)
Terminal
Blocks
Network
Interface
Network
Cable
Figure 4-3 Insert Terminals and Network Cable