HIKVISION DS-KB8113-IME1 Series - Wiring ‰‰‰Cr‰‰Ti‰N; Door Lock Wiring

2.2 Wiring 
2.2.1 Door Lock Wiring
Terminal NC/COM is set as default for   lock/electric bolt; terminal NO/ COM is
set as default for  electric strike.
To connect electric lock, it is required to set the output of terminal NC/COM/NO to be electric lock
via Batch  Tool or iVMS-4200 client  or the web browser.
Figure 2-2 Door Lock Wiring
DS-KB8113-IME1(B) Series Vandal-Resistant Door  User Manual
4